Filter
Top Products
46 CHAPTER 4: INSTALLING OR REMOVING AN INTERFACE MODULE
3 Insert the new module.
4 Reinstall the screw on the standoff.
5 Reinstall the cover and the cover screws.
CAUTION: The DIP switches should all be in the down position. The DIP
switches are accessible through an opening on the side of the chassis.
6 If the bridge/router was mounted with brackets, reinstall the brackets and
remount it.
7 Reconnect the power cord and all cables.
Front panel
Connectors
Connectors
(on underside
of module)
Install module by matching connectors
DIP switches should all
be in the down position
Install screws