Filter
Top Products
Configuring X.25 97
Scenario 3: Fully
Meshed Topology
A fully meshed topology consists of bridge/routers that are connected
directly to every other bridge/router. Between each bridge/router, you
must order a Frame Relay circuit from the service provider.
No configuration is required for this scenario.
Configuring X.25 This section describes two X.25 scenarios:
■ Scenario 1: Multiple Destinations, Nonmeshed
■ Scenario 2: Fully Meshed Topology
See Using Enterprise OS Software to modify the default DTE profile, to
create a permanent virtual circuit (PVC), or to configure connection
services.
!6 (port)
NETBuilder/II
®
CSU/DSU
CSU/DSU
CSU/DSU
CSU/DSU
!5 (path)
Frame Relay