Filter
Top Products
62 CHAPTER 5: LOGGING ON AND PERFORMING ADMINISTRATIVE TASKS
Setting Up Security To allow system administrator-only access to files, use these commands
and parameters:
■ RemoteManager
This SYS Service parameter specifies the Internet addresses of devices
that can connect to the system through the REMote command. For
information on how to use the RemoteManager parameter, see
Reference for Enterprise OS Software.
■ COMmunity
This SNMP Service parameter modifies the list of communities. For
information on how to use the COMmunity parameter, see Reference
for Enterprise OS Software.
■ To implement auto startup, many NETBuilder configuration files are by
default accessible to any SNMP-based manager with read and write
privileges. To set SNMP access to read-only for all managers, enter:
DELete -SNMP COMmunity “anycom”
ADD -SNMP COMmunity “anycom” RO
■ The Audit Log feature generates a log message on a network
management workstation that captures configuration changes and
events for monitoring bridge/routers. For more information on this
feature, see Using Enterprise OS Software.