Filter
Top Products
81
Scenario 1: Using Each B Channel Separately
If you need to connect to two separate locations at 64 Kbps, use each B
channel separately. Each B channel can connect to only one location,
though both locations can be separate ports on the same bridge/router.
Start here
Done
B1: 64 K
B2: 64 K
1-510-555-1234
Create the dial number list for ports 3 and 4:
ADD !3 -PORT DialNoList "1-408-555-1000" Baud = 64 Type = Bri
ADD !4 -PORT DialNoList "1-510-555-1234" Baud = 64 Type = Bri
!4
!3.2 (path)
1-408-555-1000
!3
!3.1 (path)
NETBuilder/II
®
Each B channel connects
separately to one destination.
Syntax: ADD !<port> -PORT DialNoList "<phone no>"
[Baud = <rate> (1.2–16000)] [Type = Modem | Bri | Sw56]
[Pos = <number>]