3Com 6200 Switch User Manual


 
2-2 3COM Security Switch 6200 Hardware and Software Users Guide
Installation
Site
Requirements
The system installation site should meet the following requirements:
Shipment Check Using the packing slip as a reference, inspect package contents for missing or
damaged items. If parts are missing or damaged, call your 3COM Systems
Support Representative (Refer to Chapter 5, for contact information.). The
following items, as a minimum, are included with your system:
Chassis
Mounting screws
Rubber feet
Two power cables
One serial console port cable
CDs containing the system software, product documentation, and
applications
Warranty card
Figure 2-1 shows the standard shipping contents:
Requirement Description
Operating Temperature 0 to 40 degrees C
Relative Humidity 10% - 90%, non-condensing
Minimum Ventilation 6 inches (15.2 cm) to the front, back, and sides of
the chassis
Service Clearance 30 inches (76.2 cm) at the front of the chassis
Power Sources 100 to 240 VAC outlets, with grounding and power
surge protection
Rack Standard 19-inch rack with grounding