Filter
Top Products
C-2 3COM Security Switch 6200 Hardware and Software Users Guide
Regulatory Information
EMI Compliance
Radio Frequency Interference
NOTE
In accordance with FCC Part 15 Subpart B requirements, changes or
modifications made to this equipment not expressly approved by 3COM
Corporation could void the user’s authority to operate this equipment.
The 3COM Security Switch 6200 is designed for Class A use only. Do not
attempt to use this equipment in a domestic environment, which requires
Class B distinction. The system may cause interference with domestic
products.
This equipment produces electromagnetic energy at radio frequencies and,
if not installed and operated in accordance with 3COM instructions, as
contained in this document, could cause interference to radio
communications and/or interfere with the operation of other RF devices.
This equipment has been tested and found to comply with the limits for a
Class A Computing Device pursuant to Subpart B of Part 15 of the FCC
Rules, which are designed to provide reasonable protection against such
interference when the equipment is operated in a commercial environment.
Operation of this equipment in a residential area may cause interference.
Should this occur, the user may be required to discontinue operation of the
equipment, or take other such measures as may be adequate to rectify the
condition at the user’s expense.
VCCI Statement V-3/2000.04
This is a Class A product based on the standards of the Voluntary Control
Council for Interference by Information Technology Equipment (VCCI). If
this equipment is used in a domestic environment, radio disturbance may
arise. When such trouble occurs, the user may be required to take
corrective actions.
Other EMI Approvals
• EN 55022
• AS/NZS 3548:95
• BSMI CNS 13438 Class A
Immunity Compliance
The system meets all EN 55024 immunity testing.