Filter
Top Products
4-10 3COM Security Switch 6200 Hardware and Software Users Guide
Configuring the Security Switch 6200 System
SNMP Traps
==========
Change the SNMP Trap Destinations <Add, Delete, Modify
or eXit>[eXit]:
7. Enter the desired option or enter X to return to SNMP
Configuration Menu.
SNMP configuration
==================
1) SNMP Server
2) Communities
3) Trap Destinations
X) Exit
8. Enter the desired option or enter X to return to the main menu.
Configuring
Physical
Interfaces
There are three types of physical interfaces on the system: management,
gigabitethernet, and fastethernet. The management interfaces allow you to
manage the configured interfaces.
To configure the physical interfaces:
1. Select Option 6 from the main menu.
Physical Interfaces
===================
Destination Port Type Version Community
10.2.1.48 162 trap SNMPv1 foobar
Interface
MAC Address
(Configured)
Auto
neg
Duplex Speed
management 1 00:03:47:f1:aa:52 (N) on half 10
management 2 00:03:47:f1:aa:53 (N) on half 10
fastethernet 1 (N) on half 10
fastethernet 2 (N) on half 10
fastethernet 3 (N) on half 10
fastethernet 4 (N) on half 10
fastethernet 5 (N) on half 10
fastethernet 6 (N) on half 10
fastethernet 7 (N) on half 10
fastethernet 8 (N) on half 10
fastethernet 9 (N) on half 10
fastethernet 10 (N) on half 10
fastethernet 11 (N) on half 10
fastethernet 12 (N) on half 10
fastethernet 13 (N) on half 10