Filter
Top Products
3COM Security Switch 6200 Hardware and Software Users Guide 4-25
Configuring the Security Switch 6200 System
></data>
</vrrp>
Restoring the
system to
Factory
Default
Settings
To delete the current configuration and return the system to its factory
defaults, use the following command at the admin prompt.
NOTE: The IP address of interface Management 1, telnet, and the default
gateway are left in tact. This done in the event you telneted into the box.
[admin@xxxxx bin]$ ./cos_reset_system
Getting Help
Within the
Configuration
Tool
To receive help from within the system Configuration Tool, use the following
command at the admin prompt.
[admin@xxxxx bin]$ ./cos_show_system --help
The following options can be used within this Help system:
cos_show_system [OPTION...]
-v, --version - displays the current configuration tool
version number.
-h, --help - displays the configuration tool’s help
system.
-f, --file=STRING - displays the configuration output
file. The default value is stdout.
-d, --default - tells the Help system to include
default values.