Filter
Top Products
4-8 3COM Security Switch 6200 Hardware and Software Users Guide
Configuring the Security Switch 6200 System
etc/snmp/snmp.local.conf)]: srhen@crossbeamsys.com
Enter SNMP Location [Unknown (edit /etc/snmp/
snmpd.conf)]: Lab
SNMP configuration
==================
1) SNMP Server
2) Communities
3) Trap Destinations
X) Exit
Enter choice <1 - 3, X>[X]: 1
SNMP Server
===========
Enabled enabled
Contact lab@3com.com
Location The Lab
Would You Like to Modify the SNMP Configuration <y or
n>[n]:
3. Enter y to modify the SNMP configuration or n to return to the SNMP
Configuration menu.
SNMP configuration
==================
1) SNMP Server
2) Communities
3) Trap Destinations
X) Exit
4. Configure SNMP Communities. For example:
Enter choice <1 - 3, X>[X]: 2
SNMP Communities
================
Change the SNMP Communities <Add, Delete or
eXit>[eXit]: a
Enter Community Name []: foobar
Enter IP Source Addresses [0.0.0.0/32]: 10.2.1.48/32
Enter Access Mode <read-only, read-write>[read-only]:
read-write
Community Address Netmask Access