Filter
Top Products
3COM Security Switch 6200 Hardware and Software Users Guide 4-13
Configuring the Security Switch 6200 System
Configuring
Network
Interfaces
A network interface associates an IP address with a physical connection and
optionally a VLAN id. To configure network interfaces:
1. Select Option 8 from the main menu.
IP Interfaces
=============
2. To add a network interface, select add from the main menu.
For example:
Modify the IP Interfaces <Add, Delete, Modify or
eXit>[eXit]: a
Physical Interface [fastethernet 1]:
VLAN Interface <Y or N>[N]:
Interface State <disabled, enabled>[enabled]:
Enter the IP Address [0.0.0.0/0]: 128.205.1.23/24
Broadcast Address [128.205.1.255]:
MTU [1500]:
IP Interfaces
=============
3. Enter the desired option to add, delete, or modify additional network
interfaces or enter x to return to the main menu. For example:
Modify the IP Interfaces <Add, Delete, Modify or
eXit>[eXit]: a
Physical Interface [fastethernet 1]:
VLAN Interface <Y or N>[N]: y Enter VLAN ID <1 - 4095>:
100
Interface State <disabled, enabled>[enabled]:
Enter the IP Address [0.0.0.0/0]: 128.205.2.23/24
Broadcast Address [128.205.2.255]:
MTU [1500]:
Enabled Address Netmask Broadcast MTU
management 1
enabled
192.168.10.6 255.255.255.0 192.168.10.255 1500
Enabled Address Netmask Broadcast MTU
management 1
enabled
192.168.10.6 255.255.255.0 192.168.10.25
5
1500
fastethernet 1
enabled
128.205.1.23 255.255.255.0 128.205.1.255 1500