Filter
Top Products
3COM Security Switch 6200 Hardware and Software Users Guide 4-9
Configuring the Security Switch 6200 System
SNMP Communities
================
Change the SNMP Communities <Add, Delete or
eXit>[eXit]: a
Enter Community Name []: public
Enter IP Source Addresses [0.0.0.0/32]: 10.0.0.0/8
Enter Access Mode <read-only, read-write>[read-only]:
SNMP Communities
================
Change the SNMP Communities <Add, Delete or
eXit>[eXit]:
5. Enter the desired option or enter X to return to SNMP
Configuration Menu.
SNMP configuration
==================
1) SNMP Server
2) Communities
3) Trap Destinations
X) Exit
6. Configure SNMP Trap Destinations. For example:
Enter choice <1 - 3, X>[X]: 3
SNMP Traps
==========
Change the SNMP Trap Destinations <Add, Delete, Modify
or eXit>[eXit]: a
Enter Trap Destination [0.0.0.0]: 10.2.1.48
Enter Port Number [162]:
Enter Trap Type <trap, inform>[trap]:
Enter SNMP Version <SNMPv1, SNMPv2c, SNMPv3>[SNMPv1]:
Enter Community []: foobar
Community Address Netmask Access
foobar 10.2.1.48 255.255.255.255 read-write
Community Address Netmask Access
foobar 10.2.1.48 255.255.255.255 read-write
public 10.0.0.0 255.0.0.0 read-only
Destination Port Type Version Community