Filter
Top Products
4-12 3COM Security Switch 6200 Hardware and Software Users Guide
Configuring the Security Switch 6200 System
Modify Physical Interface Parameters <Y or N>[N]:
3. Enter y to modify additional physical interfaces or n to return to the
main menu.
Configuring
Tap Interfaces
Tap interfaces are used to copy the input and output packets from a
physical interface prior to the processing by the firewall acceleration
process. These taps can be used by intrusion detection software to sniff the
interface. Tap interfaces can be given any device name of up to 15
characters, and a single tap can capture the traffic for multiple physical
interfaces. To configure Tap Interfaces:
1. Select Option 7 from the main menu.
Tap Interfaces
=============
Name Physical Interfaces
Modify the Tap Interfaces <Add, Delete, Modify or
eXit>[eXit]: a
2. Enter the desired option to add, delete, or modify a tap interface or
enter x to return to the main menu. For example:
Tap Name []: tap1
Physical Interfaces []: fastethernet 1, fastethernet 2,
gigabitethernet 17
Tap Interfaces
=============
Name Physical Interfaces
tap1 fastethernet 1, fastethernet 2, gigabitethernet 17
Modify the Tap Interfaces <Add, Delete, Modify or
eXit>[eXit]:
3. Enter the desired option to add, delete, or modify additional tap
interfaces or enter x to return to the main menu. For example:
Tap Name []: tap2
Physical Interfaces []: fastethernet 3
Tap Interfaces
=============
Name Physical Interfaces
tap1 fastethernet 1, fastethernet 2, gigabitethernet 17
tap2 fastethernet 3
gigabitethernet 18 (N) on half 10
Interface
MAC Address
(Configured) Auto
neg
Duplex Speed