Filter
Top Products
3-4 EXTENSA 700/710 Service Guide
Removing the Hard Disk Drive
1. To remove the internal hard disk drive, remove the screw with a flat-bladed
screwdriver or a coin.
2. Carefully pull out the hard disk drive cover to remove.
Disassembling the hard disk drive:
1. To disassemble the hard disk module, remove the 2 screws on both sides
of the hard disk drive.
2. Separate the hard disk drive from its bezel.
3. Remove the hard disk drive from it’s shield plate
4. Disconnect the hard disk cable from the hard disk drive.
5. To re-connect the hard disk cable, be sure that the 1st pin is aligned up as
indicated.
700SG-3.fm Page 4 Monday, June 8, 1998 11:01 AM