Filter
Top Products
3-6 EXTENSA 700/710 Service Guide
Removing the keyboard
1. Remove the hinge cover by sliding it out.
2. Remove the middle cover by using a flat-bladed screwdriver to release the
latches.
3. Lift the cover to remove
4. Replace the middle cover.
5. The latches of the middle cover and the upper case must be matched,
then place it into position.
6. Pull the keyboard up and outward to expose the keyboard connector at
CN22.
7. The keyboard can be removed by releasing this connector.
700SG-3.fm Page 6 Monday, June 8, 1998 11:01 AM