Filter
Top Products
Chapter 4 4-17
Auto Test Performs multiple tests of the selected items and AUTO check the
select test items in sequence.
Note: PCMCIA Diagnostic Supports Manual test only. Do not select
PCMCIA Diagnostic in Auto Test.
The screen below appears if you select AUTO Test.
Specify the desired number of tests and press Enter.
After you specify the number of tests to perform, the screen shows a list of
test items (see below).
Move the highlight bar from one item to another. Press Space to enable or
disable the item. Press Enter to view the available suboptions of each
selected item. Press
Esc
to close the close the submenu.
PQA Vx_x xx-xx-xx
Diag
Resoult
SysInfo
Option
Exit
Diag
MANUAL TEST
AUTO TEST
TEST COUNT VALUE (1...9999) 1
PQA Vx_x xx-xx-xx
Diag
Resoult
SysInfo
Option
Exit
Diag
MANUAL TEST
AUTO TEST
Test Items
[ ] Sytem Board
[ ] Memory
[ ] Keyboard
[ ] Video
[ ] Parallel Port
[ ] Serial Port
[ ] Diskette Drive
[ ] Hard Disk
[ ] CD-ROM
[ ] Coprocessor
[ ] Pointing Dev.
[ ] Cache
SPACE: mark/ummark selecting item
ESC : return to upper menu
F2 : test the marked item(s)
ENTER: open subitem’s menu
Test Times = 1
700SG-4.fm Page 17 Thursday, May 28, 1998 1:13 PM