Filter
Top Products
Chapter 3 3-7
Removing the Display Module
1. Disconnect the LED cable from the main board at CN13.
2. Remove the 2 screws of the LCD FPC cable.
3. Disconnect the LCD FPC cable from the motherboard at CN12.
4. Disconnect the internal microphone power cable on CN9 of the main
board.
5. Remove the 2 screws at the base and at the back of the lower case.
6. Carefully detach the display from the main unit
Removing the heat sink:
1. To detach the upper case, first remove the 2 screws from the heatsink.
2. Lift out the heat sink.
700SG-3.fm Page 7 Monday, June 8, 1998 11:01 AM