Filter
Top Products
Chapter 3 3-11
Disassembling the LCD:
1. Remove the 5 screws on the display bezel.
2. Pull out the LCD bezel carefully.
3. Remove the internal microphone from the display panel.
4. Remove the 2 screws located at either side of the LED board.
5. Lift off the LED board from the display.
6. Remove the 2 screws which secure the inverter board.
7. Remove the 4 screws from the LCD.
8. Detach the LCD and inverter board from the display panel.
9. Remove the inverter board by disconnecting the FPC cable and the LCD
power cable.
10. Remove the FPC cable from the display.
700SG-3.fm Page 11 Monday, June 8, 1998 11:01 AM