Filter
Top Products
3-6
PCI Ethernet and Fast Ethernet Adapters
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: 511472-00, Rev. A Page: 3-6
Print Spec Number: 496708-00
Current Date: 5/5/97 ECN Date: 5/97
Diagnostic LEDs
Diagnostic Light Emitting Diodes (LEDs) provide information about
link status and network activity. See the table below for details on
each LED function.
Link Status (L.S.)
LED lights when the adapter’s driver is loaded, and indicates that an
electronic link exists between the adapter device and repeater or switch.
Speed Ports Color
10 Mbps RJ-45 Green, with the exception of the Quartet and the
Ultimate Combo—where it is yellow.
100 Mbps RJ-45 Green. The LED blinks on T4 adapters.
Network Activity (N.A.)
LED lights up to signal the presence of incoming or outgoing traffic.
Speed Ports Color
10 Mbps RJ-45, BNC, AUI Yellow
100 Mbps RJ-45, BNC, AUI Yellow
Speed100 (ANA-6911A/TX)
The Speed100 LED is green. When
ON
, it indicates 100Mb/s, when
OFF
, it
indicates 10Mb/s.
ls
na
na
ls
ls
na
ls
na
ls
na
Speed100
na, p1
na, p2
na, p3
na, p4
ls, p1
ls, p2
ls, p3
ls, p4
ANA-6901 Combo*
na
ls
Quartet
ANA-6911A/TX
SC Fiber Optic* ST Fiber Optic* Ultimate Combo
*10Mbps and 100Mbps single speed adapters provide only 1 link status and 1 netw
o