Filter
Top Products
4-9
Installing Network Drivers
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: 511472-00, Rev. A Page: 4-9
Print Spec Number: 496708-00
Current Date: 5/5/97 ECN Date: 5/97
DOS ODI
Note:
Consult the \readme\dosodi.txt file for the latest driver
information and installation instructions. Some procedures
or information may have changed or may not have been
available when this user’s guide was printed.
The following is a partial list of products supported by the DOS ODI
driver:
■
Novell NetWare 286 Client
■
Novell NetWare 3.1x Client
■
NetWare 4.x DOS Requester (VLM)
■
Novell Personal NetWare
■
Novell LAN WorkPlace for DOS
■
Windows for Workgroups
The DOS ODI driver is compatible with DOS memory managers
such as EMM386 and can be loaded into high memory. In addition,
the driver is compatible with Windows 3.0 and later.
Automated NetWare Client Installation
If you are using the VLM DOS Requester, you can run the auto-
mated NetWare Client Install that comes with NetWare 3.x:
1
Run
Install
from your Novell client install diskette
.
2
At Step 4 during the install process, remove the Novell client
install diskette and insert your Adaptec diskette, specifying
\dosodi
as the directory location for your adapter driver.
Manual Installation
To install the DOS ODI driver manually, follow these instructions:
1
Insert the Adaptec setup diskette into drive A.
2
Copy the
\dosodi
directory on the Adaptec setup diskette into
your workstation's NetWare directory (usually called
\nwclient
)