Adaptec PCI Ethernet and Fast Ethernet Adapters Network Card User Manual


 
A-9
Adapter Specifications
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: 511472-00, Rev. A Page: A-9
Print Spec Number: 496708-00
Current Date: 5/5/97 ECN Date: 5/97
ANA-6944A/TX Quartet
Bus Interface PCI 32-bit bus master
Hardware Interrupts PCI INTA, supports shared interrupts
Base I/O Addresses Assigned by BIOS
Ethernet Node ID Number 000092xxxxxx
Power Requirements + 5 volts @ 2 Amp. max
+ 5 volts @ 3.5 Amp. max
Environmental
Operating Temperature 0× C to 50× C
Humidity 5% to 85% non-condensing
Altitude 3000m maximum
Network Interface
Standards
Ethernet IEEE 802.3 10BASE-T
Ethernet IEEE 802.3u 100BASE-TX
Certifications FCC Class A
CE Class A
Network Speeds Supported 10 Mb/s
20 Mb/s Full Duplex
100 Mb/s
200 Mb/s Full Duplex
Network Connectors RJ-45 female (4)
Physical Dimensions 9.75" x 4.2" (conforms to PCI Long
Card specification)
Diagnostic LEDs Green link status light, normally on,
indicates 100TX link.
Yellow link status light indicates 10T
link.
Yellow network activity light on when
activity detected