Filter
Top Products
A-7
Adapter Specifications
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: 511472-00, Rev. A Page: A-7
Print Spec Number: 496708-00
Current Date: 5/5/97 ECN Date: 5/97
ANA-6911/UC Ultimate Combo
Bus Interface PCI 32-bit bus master
Hardware Interrupts PCI INTA, supports shared interrupts
Base I/O Addresses Assigned by BIOS
Ethernet Node ID Number 000092xxxxxx
Power Requirements + 5 volts @ 3 Amp. max, or
+3.3 volts @ 5 Amp. max
Environmental
Operating Temperature 0× C to 50× C
Humidity 5% to 85% non-condensing
Altitude 3000m maximum
Network Interface
Standards
Ethernet IEEE 802.3 10BASE-T
Ethernet IEEE 802.3 10BASE-2
Ethernet IEEE 802.3 10BASE-5
Ethernet IEEE 802.3u 100BASE-T4
Ethernet IEEE 802.3u 100BASE-TX
Certifications FCC Class A
CE Class A
Network Speeds Supported 10 Mb/s
20 Mb/s Full Duplex
100 Mb/s
200 Mb/s Full Duplex (TX only)
Network Connectors RJ-45 female, BNC, AUI
Physical Dimensions 6" x 3.9" (conforms to PCI Short Card
specification)
Diagnostic LEDs Link status 10/100 (yellow/green)
normally on
Network activity (yellow) on when
activity detected