Adaptec PCI Ethernet and Fast Ethernet Adapters Network Card User Manual


 
A-10
PCI Ethernet and Fast Ethernet Adapters
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: 511472-00, Rev. A Page: A-10
Print Spec Number: 496708-00
Current Date: 5/5/97 ECN Date: 5/97
ANA-6944/T4/Quartet
Bus Interface PCI 32-bit bus master
Hardware Interrupts PCI INTA, supports shared interrupts
Base I/O Addresses Assigned by BIOS
Ethernet Node ID Number 000092xxxxxx
Power Requirements + 5 volts @ 2 Amp. max
+ 5 volts @ 3.5 Amp. max
Environmental
Operating Temperature 0× C to 50× C
Humidity 5% to 85% non-condensing
Altitude 3000m maximum
Network Interface
Standards
Ethernet IEEE 802.3 10BASE-T
Ethernet IEEE 802.3u 100BASE-T4
Certifications FCC Class A
CE Class A
Network Speeds Supported 10 Mb/s
20 Mb/s Full Duplex
100 Mb/s
Network Connectors RJ-45 female (4)
Physical Dimensions 9.75" x 4.2" (conforms to PCI Long
Card specification)
Diagnostic LEDs Link status (green) normally on, or
blinking for 100 Mb/s
Network activity (yellow) on when
activity detected