Adaptec PCI Ethernet and Fast Ethernet Adapters Network Card User Manual


 
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: 511472-00, Rev. A Page: A-1
Print Spec Number: 496708-00
Current Date: 5/5/97 ECN Date: 5/97
A-1
A
▼▼▼▼
Adapter Specifications
ANA-6901 and ANA-6901 Combo
Bus Interface PCI, 32-bit bus master
Hardware Interrupts PCI INTA, supports shared interrupts
Base I/O Addresses Assigned by BIOS
Ethernet Node ID Number 0000D1xxxxxx
Power Requirements + 5 volts @ 0.5 Amp. max. (TP)
+ 5 volts @ 1 Amp. max. (Combo)
Environmental
Operating Temperature 0× C to 50× C
Humidity 5% to 85% non-condensing
Altitude 3000m maximum
Network Interface
Standards
Ethernet IEEE 802.3 10BASE-T
Ethernet IEEE 802.3 10BASE-2
(Combo only)
Certifications FCC Class B
CE Class B
Network Speeds Supported 10 Mb/s
20 Mb/s Full Duplex (RJ-45 only)
Network Connectors RJ-45 female, BNC
Physical Dimensions 4.875" x 2.875" (conforms to PCI
Short Card specification)
Diagnostic LEDs Link status (green) normally on for
RJ-45 connector
Network activity (yellow) on when
activity detected