Filter
Top Products
A-2
PCI Ethernet and Fast Ethernet Adapters
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: 511472-00, Rev. A Page: A-2
Print Spec Number: 496708-00
Current Date: 5/5/97 ECN Date: 5/97
ANA-6904 and ANA-6904BNC Quartet*
Bus Interface PCI, 32-bit bus master
Hardware Interrupts PCI INTA, supports shared interrupts
Base I/O Addresses Assigned by BIOS
Ethernet Node ID Number 000092xxxxxx
Power Requirements + 5 volts @ 2 Amp. max. (TP)
+ 5 volts @ 3.5 Amp. max. (BNC)
Environmental
Operating Temperature 0× C to 50× C
Humidity 5% to 85% non-condensing
Altitude 3000m maximum
Network Interface
Standards
Ethernet IEEE 802.3 10BASE-T
Ethernet IEEE 802.3 10BASE-2
Certifications FCC Class A
CE A
Network Speeds Supported 10 Mb/s
20 Mb/s Full Duplex (RJ-45 only)
Network Connectors RJ-45 female (4), or BNC (4)
Physical Dimensions 9.75" x 4" (conforms to PCI Long Card
specification)
Diagnostic LEDs Link status (green) normally on for
RJ-45 connector
Network activity (yellow) on when
activity detected