Filter
Top Products
Set Up the Campus-REX System
Campus-REX RS Interface Card User Manual 3-15
4 Type the number for the desired HDSL transmission rate then press
. The terminal returns to the HDSL Parameters menu and displays
the new HDSL Rate.
5 Type to exit the menu, then confirm any HDSL changes you have
made.
To continue setting up the system, proceed to “Configure the Campus-REX
as a Bridge or Router” on page 3-19.
Mar 10, 2001 ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx 13:19:32
Local Unit ID: Campus-REX Unit #34 Local I/F: REX
Remote Unit ID: Campus-REX Unit #12 Remote I/F: REX
Circuit ID: Network Extension Circuit 5001
SELECT HDSL HIGH RATE
Current HDSL Rate: 256
Current Loop Mode: 2 Loops
1) N/A 7) 896 kbps 13) 1664 kbps
2) 256 kbps 8) 1024 kbps 14) 1792 kbps
3) 384 kbps 9) 1152 kbps 15) 1920 kbps
4) 512 kbps 10) 1280 kbps 16) 2048 kbps
5) 640 kbps 11) 1408 kbps 17) 2176 kbps
6) 768 kbps 12) 1536 kbps 18) 2304 kbps
(R)eturn (M)ain Menu
ENTER CHOICE>
ENTER
R
CAD1069i5.book Page 15 Thursday, May 30, 2002 7:32 AM