Filter
Top Products
Manage Software and Configuration
96 MM701G and MM702G User Manual
MANAGE SOFTWARE AND CONFIGURATION
Update System Software
Using the Web interface HTTP Upgrade capability, you can upgrade
the software (.bin) and http files on your modem. To complete an
upgrade, specify the IP address of a server on the LAN side of
modem where the new firmware is stored.
1 Click
System on the menu bar, then Software Update under [System] to access the Software
Update page.
2 Click
Browse, locate the server on the LAN where the firmware image or configuration file
is located, then click
Open.
The software update process takes about 90 seconds to complete and after the
update the modem resets itself. Do not recycle the power during this process.
This will cause permanent image corruption.
It is strongly recommended that you use this procedure to upgrade software
rather than upgrading through a telnet session or through the Console port.
System
Software Update