Filter
Top Products
Appendix A: Accessing the Command-Line Interface
MM701G and MM702G User Manual 107
Add a New Session
1 On the WAN Session Management menu, enter 2 to add a new session. The Create new session
menu is displayed.
.
2 Select one of the following protocols for this session:
•
1—Create RFC 1483 bridged session if the modem forwards packets based on MAC
addresses. You can enable Spanning Tree when you select Bridge sessions. See
“Change Spanning Tree Setting” on page 51.
•
2—Create RFC 1483 routed session if the modem routes packets based on IP addresses.
•
3—Create PPPoA routed session if the modem establishes PPP sessions over ATM with
the service provider and routes packets based on IP addresses.
•
4—Create PPPoE routed session if modem establishes PPP sessions over Ethernet with
the service provider and routes packets based on IP addresses.