Edit a WAN Session
38 MM701G and MM702G User Manual
The following shows the fields you can edit for a PPP session or you can delete the session.
The
Protocol field at the top of the dialog is read-only. It indicates the protocol that you
previously selected for this session.
3 Change session parameters as required. Go to the following pages for parameter definitions
based on the protocol used for that session:
• For an RFC1483-Bridge session, go to page 27.
• For an RFC1483-Routed session, go to page 29.
• For a PPPoA Routed session, go to page 32.
• For a PPPoE Routed session, go to page 32.
4 Do one of the following:
• Click
Apply, then save changes as described in Chapter 5, “Saving Changes.”
• Click
Delete to entirely remove the session, then save changes as described in
Chapter 5, “Saving Changes.”