Filter
Top Products
Chapter 3: Configuring the LAN
MM701G and MM702G User Manual 23
CONFIGURE THE ETHERNET PORT MODE
The modem LAN (Ethernet) port must be set the same half- or
full-duplex mode as the NIC (or other Ethernet equipment) that
connects directly to it for management. Determine the mode to
which your NIC (or other Ethernet equipment) is set, then configure
the same mode for the modem LAN port.
1 Select
LAN on the menu bar, then select Ethernet Mode under LAN Options] to access the
Ethernet Mode page.
2 Select either
Half Duplex or Full Duplex.
LAN
Ethernet Mode