Filter
Top Products
Connect to the Console Port
100 MM701G and MM702G User Manual
CONNECT TO THE CONSOLE PORT
1 Install the flat gray console cable between the modem Console port and your PC as shown
below, using the DB-9 port adapter on the PC, if required.
ACCESS THE COMMAND-LINE INTERFACE
You can access the command-line interface through the direct connection to the modem console
port and using a terminal emulation program. You can also access the command-line interface
using a telnet session. To use a telnet session, you must have IP access to the modem either
through the 10Base-T LAN port (LAN-side access) or through an IP address assigned to a WAN
session (WAN-side access). The following sections provide instructions for setting up both
types of command-line interface access.
D
SL LIN
E
POW
E
R
MD
I
MDI-X
1
0
B
A
S
E
-T
C
O
N
S
O
L
E
Console port
Grey cable
PC
9-pin COM
port
Adapter
M0326-A