Filter
Top Products
Complete a G.shdsl Quick Configuration
58 MM701G and MM702G User Manual
COMPLETE A G.SHDSL QUICK CONFIGURATION
Configure basic operating parameters for the modem.
1 Select
DSL on the menu bar, then select Quick Configuration under
[DSL Options].
2 Configure the following parameters as directed by your service provider:
Operating Mode
When the modem is connected to a service provider through a DSLAM, the operating
mode is
Remote (default setting).
When two modems are used in a point-to-point application (LAN extension, for
example), one modem at the customer or user site is set to
Remote and the second
modem in the CO or wiring closet is set to
Central-Office. For instruction on setting up
G.shdsl parameters and other related parameters for a point-to-point modem
application, go to Chapter 7, “Implementing a Point-to-Point LAN Extension.”
Standard Annex
Select one of the following Annexes:
•
Annex-A for operating conditions typically found in the North American
implementation of G.shdsl
•
Annex-B for operating conditions typically found in the European implementation
of G.shdsl. This is the default mode for the MM701G modem.
Quick Configuration
DSL