Filter
Top Products
Complete a Custom Configuration
66 MM701G and MM702G User Manual
COMPLETE A CUSTOM CONFIGURATION
If you implement custom configuration where you do not use factory default parameters for
your modems, you will need to make changes to the configuration on both the Remote and the
Central-Office modem. The following sections provide configuration changes for the Remote
modem and then for the Central-Office modem.
Configure the Remote Modem
To configure the remote modem, you need to change the following settings:
• operating mode for the modem, (see “Configure the Remote Operating Mode” on page 66)
• WAN parameters, (see “Configure the Remote WAN” on page 67)
• LAN parameters, (see “Configure the Remote LAN” on page 69)
Configure the Remote Operating Mode
1 Select DSL on the menu bar then select Advance Configuration under [DSL Options].
2 In the
Operating Mode box, select Remote to configure the modem for this mode.
3 Click
Apply.