Filter
Top Products
Chapter 7: Implementing a Point-to-Point LAN Extension
MM701G and MM702G User Manual 73
2 Select RFC 1483 bridged from the WAN Configuration page to display the following page.
3 In the
Session Name box, assign a name to this session (it can be the same name set up for
the Remote modem).
4 In the
Virtual Path ID (VPI 0 - 4,095) box, enter the Virtual Path ID. This must match the
Virtual Path ID of the Remote modem.
5 In the
Virtual Channel ID (VCI 32 - 65,535) box, enter the Virtual Channel ID. This must match
the Virtual Channel ID of the Remote modem.
6 Click
Apply.