Filter
Top Products
Complete a Quick Installation
64 MM701G and MM702G User Manual
COMPLETE A QUICK INSTALLATION
In a quick installation, you change configuration only for the Central-Office mode modem. The
Remote modem uses its factory default parameters. To set up the Central-Office modem, follow
the instructions in the following sections. The modems use a default bridging WAN session
(
RFC1483-bridged) which has a predefined ATM connection using Virtual Path ID of 0 and
Virtual Channel ID of 35.
Configure for Central-Office Mode
1 Select DSL on the menu bar, then select Advance Configuration under [DSL Options].
2 In the
Operating Mode box, select Central-Office to set up this modem for this mode.
3 Click
Apply.
The modem is shipped with factory defaults as a Remote modem and does not
require any additional configuration when used as a remote. Only the
Central-Office modem requires configuration changes.