Filter
Top Products
Assign IP Addresses
8 MM701G and MM702G User Manual
Use the following steps to set up a management PC to be on the same subnet with the modem.
(The example shows instructions for a PC that is running Microsoft Windows 98 SE;
instructions for other operating systems may differ slightly.)
1 From the Windows desktop, click
Start, Settings, Control Panel to open the
Control Panel dialog.
2 From the
Control Panel dialog, double-click the Network icon (shown to the
right). The
Network dialog is displayed.
3 From the
Configuration tab, double-click TCP/IP to display the TCP/IP Properties dialog.
4 The modem can be set up to serve IP addresses to devices on the LAN (DHCP server
feature). Do one of the following:
• If DHCP server has not been enabled on the modem (default setting), select
Specify an
IP address
.
• If DHCP server has been enabled on the modem, select
Obtain an IP address
automatically
and go to Step 6.
5 Enter an
IP Address and Subnet Mask that places the management PC on the same subnet as
the modem.
Use an IP address in the range of 10.0.0.2 to 10.0.0.254.
6 Click
OK to close the TCP/IP Properties dialog.
7 Click
OK to close the Network dialog.
8 Click
OK to restart the computer.
TCP/IP Network Configuration
for an Ethernet NIC