Filter
Top Products
6 SCPI Command Reference
104 N9340A User’s Guide
Control Limit line Buzzer
:CALCulate:LLINe[1]:BUZZer[:STATe]
OFF|ON|0|1
:CALCulate:LLINe[1]:BUZZer[:STATe]?
This command toggles the audio warning between
on and off. If data exceeds the limit line the buzzer
will sound an alarm.
Control Limit Line Testing
:CALCulate:LLINe[1]:[STATe] OFF|ON|0|1
:CALCulate:LLINe[1]:[STATe]?
This command toggles the limit line testing
between on and off.
If the limit line is turned on, limit pattern is
automatically turned off.
Set Limit Line Y-axis value
:CALCulate:LLINe[1]:Y <ampl>
:CALCulate:LLINe[1]:Y?
This command sets the Y-axis value of a limit line.
Limit line Y-axis value is set independently and is
not affected by the X-axis units.
*RST state: Off
Key access: [Limit] > {Beep}
*RST state: Off
Key access: [Limit] > {Limit Line}
*RST value: 0 dBm
Available unit: dBm, -dBm, mV, uV
Key access: [Limit] > {Limit Line}