Filter
Top Products
7 Error Messages
144 N9340A User’s Guide
Error Message List
NOTE
A symbol [F] at the beginning of an error message
indicates this is an error caused by manual front
panel operation. A symbol [R] at the beginning of
an error message indicates this is an error caused
by remote control mode.
Error Code Error Message Description
0 No error
–410 Query
INTERRUPTED Indicates that a condition causing
an INTERRUPTED query
occurred (see IEEE 488.2,
6.3.2.7)
–350 Query overflow Indicates the SCPI remote
interface error queue
overflowed.
–321 Out of memory Indicates an internal operation
needed more memory than that
was available.
–224 Illegal
parameter value
Indicates you sent a parameter
for this command that is NOT
allowed.
–223 Too much data Indicates a legal program data
element of block, expression or
string type was received that
contained more data than the
device could handle due to
related device-specific
requirements or memory.
–222 Data out of
range
Indicates a legal data was parsed
but could not be executed
because of the interpreted value
was outside the legal range
defined by the analyzer. The
displayed results may be clipped.