Filter
Top Products
3 Making Measurements
32 N9340A User’s Guide
5 Reduce the span to 1 MHz and if necessary
re-center the peak.
• Press [SPAN] > [1] > {MHz}.
6 Set the attenuation to 20 dB. Note that
increasing the attenuation moves the noise floor
closer to the signal level.
• Press [AMPTD] > {Attenuation} > 20 > {dB}.
Figure 7 A signal closer to the noise level (Atten: 20 dB)
7 Press [AMPTD] > Attenuation > 0 > {dB} to set the
attenuation to 0 dB.
Figure 8 A signal closer to the noise level (Atten: 0 dB)