Filter
Top Products
2 Getting Started
14 N9340A User’s Guide
WARNING
Danger of explosion if the battery is incorrectly replaced.
Replace only with the same type recommended.
WARNING
Do NOT dispose of batteries in a fire.
Do NOT place batteries in the trash. Batteries must be
recycled or disposed of properly.
CAU-CAUTION
Recharge the battery only in the analyzer. If left unused, a
fully charged battery will discharge itself over time.
Never use a damaged or worn-out adapter or battery.
Charging the batteries internally, even while the analyzer
is powered off, the analyzer may become warm. To avoid
overheating, always disconnect the analyzer from the AC
adapter before storing the analyzer into the soft carrying
case.
CAU-CAUTION
We strongly recommend you to connect the automotive
adapter to the power output connector for IT equipment,
when charging the battery on your automotives.
CAU-CAUTION
The VxWorks operating system requires full conformity to
USB 1.1 or USB 2.0 standards from a USB disk. Not all the
USB disk are built that way. If you have problems
connecting a particular USB disk, please reboot the
analyzer before inserting the next.
NOTE
Temperature extremes will affect the ability of the battery
to charge. Allow the battery to cool down or warm up as
necessary before use or charging.
Storing a battery in extreme hot or cold places will reduce the
capacity and lifetime of a battery. Battery storage is
recommended at a temperature of less than 45
o
C.
NOTE
The LAN port is reserved for future expansion. It is
inactive at this version.