Filter
Top Products
Key Reference 5
N9340A User’s Guide 77
In FFT Mode
In FFT mode, the sweep time is auto-coupled as
default. And the submenu of sweep time is invalid
in FFT mode.
Sweep
Activates the sweep mode function and accesses
associated softkeys to set functions that affect the
way a trace sweeps across the display.
Sweep
Toggles the analyzer between the continuous sweep
mode and the single sweep mode.
• Sweep (Single)
Puts the analyzer in a single sweep mode. In this
mode, pressing [BW/SWP] > {Single Sweep} enables
a sweep.
Key access: [BW/SWP] > {Sweep}
• Sweep (Cont)
Performs one sweep after another as soon as it
is triggered. Pressing [Preset] (When Preset Type
is set to Default) or turning the power on, sets
the sweep mode to continuous sweep as default.
Key access: [BW/SWP] > {Sweep}
Sweep Mode
An N9340A provides two sweep modes to meet
different sweep time requirements:
•Normal
Activates the sweep mode as default.
Key access: [BW/SWP] > {Sweep} > {Sweep Mode}