Filter
Top Products
System Management Commands
4-59
4
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to “Displaying
System Information” on page 3-8.
• The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: OmniStack*24 10/100/1000
System OID string: 1.3.6.1.4.1.6486.800.1.1.2.1.5.1.1
System information
System Up time: 0 days, 1 hours, 10 minutes, and 42.13 seconds
System Name : [NONE]
System Location : [NONE]
System Contact : [NONE]
MAC address : 00-30-F1-99-B3-DB
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
POST result
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
PCI Device 1 Test............PASS
PCI Device 2 Test............PASS
Switch Int Loopback test.....PASS
Done All Pass.
Console#