Filter
Top Products
Basic Configuration
3-11
3
CLI – Use the following command to display version information.
Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that support Multicast
Filtering, Traffic Classes, and Virtual LANs. You can access these extensions to
display default settings for the key variables.
Field Attributes
• Extended Multicast Filtering Services – This switch does not support the filtering
of individual multicast addresses based on GMRP (GARP Multicast Registration
Protocol).
• Traffic Classes – This switch provides mapping of user priorities to multiple traffic
classes. (Refer to “Class of Service Configuration” on page 3-139.)
• Static Entry Individual Port – This switch allows static filtering for unicast and
multicast addresses. (Refer to “Setting Static Addresses” on page 3-100.)
• VLAN Learning – This switch uses Independent VLAN Learning (IVL), where each
port maintains its own filtering database.
• Configurable PVID Tagging – This switch allows you to override the default Port
VLAN ID (PVID used in frame tags) and egress status (VLAN-Tagged or
Untagged) on each port. (Refer to “VLAN Configuration” on page 3-122.)
• Local VLAN Capable – This switch supports multiple local bridges; i.e., multiple
spanning trees. (Refer to “Configuring Multiple Spanning Trees” on page 3-116.)
• GMRP – GARP Multicast Registration Protocol (GMRP) allows network devices to
register endstations with multicast groups. This switch does not support GMRP; it
uses the Internet Group Management Protocol (IGMP) to provide automatic
multicast filtering.
Console#show version 4-60
Unit1
Serial number :A329025054
Hardware version :R01
Number of ports :24
Main power status :up
Redundant power status :not present
Agent(Primary)
Unit id :1
Loader version :2.0.2.2
Boot rom version :2.0.2.2
Operation code version :10.31.23.17
Console#