Filter
Top Products
Configuring the Switch
3-56
3
CLI – This example shows the default protocol settings for 802.1x. For a description
of the additional entries displayed in the CLI, See “show dot1x” on page 4-81.
Console#show dot1x 4-81
Global 802.1X Parameters
reauth-enabled: yes
reauth-period: 300
quiet-period: 350
tx-period: 300
supp-timeout: 30
server-timeout: 30
reauth-max: 2
max-req: 2
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized n/a
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
1/23 disabled Single-Host ForceAuthorized yes
1/24 enabled Single-Host Auto yes
802.1X Port Details
802.1X is disabled on port 1
.
.
.
802.1X is enabled on port 24
Status Unauthorized
Operation mode Single-Host
Max count 5
Port-control Auto
Supplicant 00-00-00-00-00-00
Current Identifier 0
Authenticator State Machine
State Connecting
Reauth Count 3
Backend State Machine
State Idle
Request Count 0
Identifier(Server) 0
Reauthentication State Machine
State Initialize
Console#