Filter
Top Products
18 AR700 Series Router
C613-03087-00 Rev E
Asynchronous port The asynchronous serial port (ASYN0) provides a general purpose port for
terminals, printers or modems. The port is wired as a DTE (Table 9 on
page 50). The default communications settings are:
• 9600 bps
• 8 data bits
•1 stop bit
•no parity
• hardware flow control
PIC bays The AT-AR750S chassis has two PIC bays, which can accommodate
combinations of the following PICs:
■ AT-AR020 PRI E1/T1 PIC, one primary rate E1/T1 port.
■ AT-AR021(S) BRI-S/T PIC, one basic rate ISDN S/T port.
■ AT-AR023 SYN PIC, one synchronous port with universal 50-way
AMPLIMITE connector.
■ AT-AR024 ASYN4 PIC, four asynchronous ports with RJ-45 connectors.
Power Supply
The AT-AR750S has a universal AC input connector and a power switch on its
rear panel. It operates with an input voltage in the range 100 VAC to 240 VAC.