Filter
Top Products
46 AR700 Series Router
C613-03087-00 Rev E
SFP Ports (AR770S only)
SFP (small form-factor pluggable) transceivers are compact, hot-swappable,
and high speed. Certain fibre-optic SFP transceivers are supported by the
AR770S router so that you can interchange port types to meet changing
network requirements. The AR770S router has 1000BASE-X Small Form-factor
Pluggable Eth slots conveniently located on the front panel.
Approved SFP
transceivers
You can purchase SFP transceivers when you purchase a router or order them
separately as needed.
SFP ports These SFP transceivers are approved and supported for the AR770S router:
For the latest list of approved SFP transceivers, contact your authorised Allied
Telesis distributor or reseller.
For instructions on inserting or removing an SFP, see the AR700 Series Router
Installation and Safety Guide packaged with your router, or available at
www.alliedtelesis.com/support/software/ .
!
Warning Do not look into SFP cables or transceivers. Invisible laser
radiation may be emitted from disconnected fibres or connectors.
PICs and NSMs
You can install PICs (Port Interface Cards) in AR700 Series routers to give the
router additional interfaces. The sections describing each router model (earlier
in this Reference) list which PICs can be installed in each model of router.
Installation information for PICs can be found in the Port Interface Card Quick
Install Guide. Detailed PIC hardware information can be found in the Port
Interface Card Hardware Reference.
NSMs can be installed in the AR745 routers. Installation information for NSMs
can be found in the Network Service Module Quick Install Guide. Detailed NSM
hardware information can be found in the Network Service Module Hardware
Reference.
The PIC and NSM Quick Install Guides and Hardware References are included
on the Documentation and Tools CD-ROM bundled with the router. They can
also be downloaded from www.alliedtelesis.com/support/software/ .
Product No. Media Type Description
AT-SPSX
(previously
AT-MG8SX)
1000BASE-SX 850 nm, 2 to 550 m with 50/125 µm MM fibre,
2 to 275 m with 62.5/125 µm MM fiber, LC
connector
AT-SPLX10
(previously
AT-MG8LX10)
1000BASE-LX 1310 nm, 2 m to 10 km with 9 µm SM fibre,
2 m to 550 m with 50 µm MM fibre, 2m to
550 m with 62.5 µm MM fibre, LC connector
AT-SPZX80
(previously
AT-MGZX)
1000BASE-ZX 1550 nm, 80 km with 9 µm SM fibre, LC
connector