Filter
Top Products
AT-WA1004G User’s Guide
115
IP Address Select the appropriate option:
❏ Automatic - The PC is set to be a DHCP client
(Windows: “Obtain an IP address automatically”).
The Wireless Router will allocate an IP address to
this PC when requested to do so. The IP address
could change, but normally won't.
❏ DCHP Client - Reserved IP Address - Select this if
the PC is set to be a DCHP client, and you wish to
guarantee that the Wireless Router will always
allocate the same IP Address to this PC. Enter the
required IP address. Only the last field is required;
the other fields must match the Wireless Router's IP
address.
❏ Fixed IP Address - Select this if the PC is using a
Fixed (Static) IP address. Enter the IP address
allocated to the PC. (The PC must be configured to
use this IP address.)
MAC Address Select the appropriate option:
❏ Automatic discovery - Select this to have the
Wireless Router contact the PC and find its MAC
address. This is only possible if the PC is connected
to the LAN and powered On.
❏ MAC is - Enter the MAC address on the PC. The MAC
address is also called the “Hardware Address,”
“Physical Address,” or “Network Adapter Address.”.
The Wireless Router uses this to provide a unique
identifier for each PC. Because of this, the MAC
address can NOT be left blank.
Buttons
Add as New
Entry
Add a new PC to the list, using the data in the
“Properties” box. If “Automatic discovery” (for MAC
address) is selected, the PC will be sent a “ping” to
determine its hardware address. This will fail unless the
PC is connected to the LAN, and powered ON.
Update
Selected PC
Update (modify) the selected PC, using the data in the
“Properties” box.
Clear Form Clear the “Properties” box, ready for entering data for a
new PC.
Refresh Update the data on screen.