Filter
Top Products
AT-WA1004G User’s Guide
21
To Clear All Data and restore the factory default values, perform the
following procedure:
1. Power OFF.
2. Hold the Reset button down while you power ON.
3. Keep holding the Reset button for a 5 seconds, until the RED LED
Status, on the front panel, has flashed twice.
4. Release the Reset button. The Wireless Router is now using the
factory default values.
WAN Port
(10/100Base-T)
Connect the DSL or Cable Modem here. If
your modem came with a cable, use the
supplied cable. Otherwise, use a standard
LAN cable.
Reset Button
This button has two functions:
❏ Reboot. When pressed and released, the
Wireless Router will reboot (restart).
❏ Clear All Data. This button can also be
used to clear ALL data and restore ALL
settings to the factory default values.
Port Description