Filter
Top Products
AT-WA1004G User’s Guide
25
Procedure
To install an AT-WA1004G, perform the following procedure:
1. Choose an Installation that is a suitable place on the network to
install the Wireless Router. Ensure the Wireless Router and the
DSL/Cable modem are powered OFF.
Note
For best Wireless reception and performance, the Wireless Router
should be positioned in a central location with minimum
obstructions between the Wireless Router and the PCs.
Also, if using multiple Access Points, adjacent Access Points should
use different Channels with at least a 2 channel separation.
2. Connect LAN Cables using standard LAN cables to connect PCs to
the Switching Hub ports on the Wireless Router. Both 10Base-T and
100Base-T connections can be used simultaneously.
If required, connect any port to a normal port on another Hub, using
a standard LAN cable. Any LAN port on the Wireless Router will
automatically function as an “Uplink” port when required.
3. Connect the DSL or Cable modem to the WAN port on the Wireless
Router. Use the cable supplied with your DSL/Cable modem. If no
cable was supplied, use a standard cable.
Figure 4 Installation Diagram
4. Power on the Cable or DSL modem.
POWER
LAN
WAN
INIT
Power
To PCs
ADSL/Cable Modem
WAN
Existing Connection