Filter
Top Products
AT-WA1004G User’s Guide
43
WEP Screen This screen is accessed by clicking the “Configure” button on the
Wireless screen. The WEP screen is shown below. Select other options for
appropriated security.
Figure 9 WEP Screen
Data - Wireless Security Screen
WEP
Authentication Normally this can be left at the default value
of “Automatic.” If that fails, select the
appropriate value - “Open System” or
“Shared Key.” Check your wireless card’s
documentation to see what method to use.
Data Key Size Select the WEP Encryption level:
❏ 64-bit (sometimes called 40-bit)
encryption.
❏ 128-bit encryption.