Filter
Top Products
AT-WA1004G User’s Guide
61
Macintosh Clients
From your Macintosh, you can access the Internet via the Wireless
Router. The procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via pop-up menu.
3. Select Using DHCP Server from the Configure pop-up menu. The
DHCP Client ID field can be left blank.
4. Close the TCP/IP panel, saving your settings.
Note
If using manually assigned IP addresses instead of DHCP, the
required changes are:
- Set the Router Address field to the Wireless Router's IP Address.
- Ensure your DNS settings are correct.